Maintenance Mechanic "B" - 1st shift LG 9
Company: Monogram Aerospace Fasteners
Primary Location: 3423 S Garfield Avenue, Commerce, CA 90040 USA
Employment Type: Hourly | Full-Time
Function: Manufacturing Production / Distribution
Equal Opportunity Employer Minorities/Women/Veterans/Disabled
Main Duties & Responsibilities
JOB SUMMARY:
Primary function of this classification
is to perform preventative maintenance to Equipment. When needed Installs,
maintains, and repairs machinery, tools, equipment, furnishing, fixtures,
physical structures, and pipe and electrical systems using skills in all the
various crafts required to complete the essential functions of the job.
Troubleshoot and test plant machinery, equipment etc.
This Job
Classification shall maintain Level 2 in the relevant
skills for a mechanical classification on the skills matrix.
DESCRIPTION OF ESSENTIAL FUNCTIONSAND
RESPONSIBILITIES:
Under supervision and review, does
moderately complex work using initiative and ingenuity by performing the
following tasks. Other work-related duties may be assigned as necessitated by
Company priorities.
Performs preventative maintenance tasks to equipment and facility.
Install, maintain, and repair machinery tools, equipment etc. Determines methods and sequence of operations to complete assigned tasks applying knowledge of plant maintenance theory practice etc. Visually inspects and tests machinery, tools and equipment to assure proper working conditions.
Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with appropriate personnel to diagnose problem or repair machine. Interprets wear or breakage patterns for root cause.
Dismantles defective machines, tools and equipment and installs new or repaired parts. Understands lubrication principles, cleans and lubricates shafts, bearings, gears, and other parts of machinery.
Lays out, assembles, installs, and maintains pipe systems, including facility plumbing, and hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment.
Repairs and maintains physical structure and appearance of establishment. Includes the performance or oversight of cleaning, painting, repairing furniture or fixtures, moving or installing furniture or fixtures, disposal of trash, recyclables, hazardous material, etc.
Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers.
Sets up and operates some machine tools such as lathe, grinder, drill, milling machine, etc. to repair or fabricate machine parts, jigs and fixtures, and tools.
Basic operation of cutting torch or welding equipment to cut or join metal parts.
Fabricates and repairs counters, benches, partitions, and other structures which may be wood, drywall, metal, glass or other construction material.
Licensed and capable of operating a motor vehicle. Skilled to drive and operate a forklift.
Works as an active team member by participating in problem solving, team building, and all other team activities to improve the processes, productivity, quality, etc. of the department and the company. Uses interpersonal skills as well as good written and verbal communications.
Performs any training of other employees in maintenance and repair functions as required. Assists other Company personnel as required.
Keeps work area and shop clean. Disposes of packaging, scrap wire, conduit, and trash appropriately.
Conducts and tracks spare parts inventory
Performs janitorial duties as needed.
Updates work in maintenance computer management system.
Equipment / Process Responsibilities -
Performs preventative maintenance and
inspections to equipment and facility. Maintains and repairs machines, tools
and equipment as well as physical plant and furnishings at highest levels of
complexity.
Material or Product Responsibilities -
Performs duties that require close
attention to work and supporting documentation specifications and other
requirements. Responsible for proper functioning of all machines, tools,
equipment, furnishings and the physical plant.
Responsibility for Work of Others -
Must communicate to appropriate personnel
any problems or concerns regarding maintenance or repair issues as it affects
production schedules or the working environment.
Safety Responsibilities -
Good housekeeping, Knowledge of all
safety requirements related to machines, tools and equipment. A thorough
knowledge of safety requirements as related to the physical plant regarding
such things as fire safety regulations, hazardous material handling procedures,
building safety codes etc. Adherence to, company safety rules is mandatory.
Initiative and Ingenuity -
Requires
initiative in solving complex problems related to maintaining and repairing the
physical plant, furnishings and all machines, tools and equipment. Uses
ingenuity in adapting to situations or conditions that are extremely variable
and where limited standardization exists.
WORK
ENVIRONMENT:
Environmental surroundings -
Work is in a machine shop environment
where noise, temperature fluctuations, exposure to outdoor elements is less
desirable than in a typical office environment.
Work may be
performed outdoors in all types of weather depending on circumstances.
Unavoidable Hazards -
Possible hazards related to cuts,
bruises, burns, electrical shock, muscle strains and severe trauma. Exposure to
moving mechanical parts, metalworking fluids & chemicals, heating elements,
open flames, high voltage electricity and airborne particles. Risks from
working in confined spaces, on ladders or other elevated positions and from
repetitive motion or awkward position. Risks from exposure to outdoor elements
and weather conditions. Risks from the operation of a motor vehicle and
forklift. Protective safety wear and equipment should be worn as appropriate to
the task at hand.
EFFORT:
Physical -
Able to lift over 30 pounds. Requires
hand and finger manipulation to operate hand and power tools, instruments, and
/ or install or repair various components such as wiring, conduit, switches,
relays, pipes, valves, etc. required by job duties. Must be able to reach,
bend, stretch, kneel, stoop, crawl and climb, and work in confined spaces such
as attics, crawl spaces etc. Job assignments may require standing, sitting,
working on a ladder, or in a confined space or outdoors for periods exceeding
15 minutes at a time.
Mental -
Reasoning ability required to interpret
moderately complex blueprints, drawings, schematics, wiring diagrams, floor
plans, etc. Must be able to draw valid conclusions from a variety of abstract
and concrete variables. Required to organize work tasks for best efficiency
with supervision or review.
Visual -
Close attention to detail with moderate
eye concentration for extended periods of time. Able to read precision
instruments. Requires close and distance vision, peripheral vision, color
vision, focus adjustment and depth.
1ST SHIFT 5am to 1:30 pm Monday through Friday
Qualifications
EDUCATION / TRAINING:
Demonstrated ability to read and write English of a level
required in Company shop documents and computer software entry and processing
requirements as well as technical, installation and maintenance manuals. Must
be capable of applying mathematical operations using fractions, decimals,
algebra and geometry as required by essential job duties. Must be able to
operate machines, tools and equipment at a complex level as required by essential job
duties. Generally
equivalent to journeyman trade school graduate or equivalent.
EXPERIENCE:
Requires 3 years experience or
equivalent skills and knowledge expertise in physical plant and industrial machine
installations, maintenance and repairs which are necessary to fulfill job
requirements. Must have a working knowledge of the National Electrical Code.
Must have knowledge of government required Building and Safety Codes as well as
knowledge of construction methods and techniques. Must read precision measuring
instruments such as various gauges, meters, calipers and micrometers a well as wiring diagrams,
machine schematics, blueprints and other
documentation similar or comparable to those used by the Company.
COMPENSATION:
In compliance with all states and
cities requiring transparency of pay, the expected pay range for this position
is $30.41 to $36.95/hour
Compensation can vary depending
on several factors, including a candidate's qualifications, skills, experience,
competencies, and geographic location. Some roles may qualify for extra
incentives like equity, commissions, or other variable performance-related
bonuses. Further details will be provided by our recruiting team during
the interview process.
This role involves access to technical data and/or hardware
subject to U.S. export control laws and regulations, including the
International Traffic in Arms Regulations (ITAR) and the Export Administration
Regulations (EAR). In order to comply with these laws, employment is contingent
upon verifying your status as a "U.S. Person" as defined by 22 C.F.R. * 120.15,
or obtaining any required government authorization.
Monogram Aerospace Fasteners promotes a drug-free workplace.
Therefore, this employment offer is contingent upon the successful completion
of a drug screen. This offer is also contingent upon the results of a
reference/background check that is satisfactory to Monogram Aerospace Fasteners
and signing a Confidential Information and Invention Assignment Agreement and
an Agreement to Arbitrate.